background image

 

 

IMPORTANT NOTICE: 

DO NOT return to place of purchase!!! 
Please contact Customer Service hotline at 800-913-8999 for help.

 

 
 

PRECAUTIONS 

 

NOTE: PLEASE READ THE FOLLOWING SAFETY

 

 

 

 

Do not use this space heater in an 
explosive atmosphere. Keep heater away 
from areas where gasoline or other 
flammable liquids or vapors are stored. 

 

Prior to use, check for damaged parts     
such as hoses regulators, pilot or burner. 

 

Do not attempt to alter unit in any manner. 
EXAMPLE: using the heater without the 
top canopy reflector or radiant screen. Do 
not shorten the burner post assembly. 

 

Heater must always be placed on a solid 
and level surface. 

 

Always maintain proper clearance to 
combustible materials.(Top 36

"

 Side

 

36

"

 

Always assure there is ample fresh air 
ventilation for outdoors use ONLY. 

 

Never replace or substitute the regulator 
with any regulator other than the factory 
suggested replacement. 

 

Do not clean heater with cleaners that are 
combustible or corrosive. 

 

Do not paint radiant screen, control panel 
or top canopy reflector. 

 

All leak test should be done with a soapy 
solution.  NEVER USE AN OPEN 
FLAME TO CHECK FOR LEAKS. 

 

The LP tank should be turned off when 
the heater is not in use. 

 

At least once a year, the unit should be 
inspected for the presence of spiders, 
spider webs or other insects. The burner 
area is a common spider haven and can 
damage the heater and render it unsafe 
for use, Check the heater immediately if 
any of the following exists: 

1.  The smell of gas in conjunction with 

extreme yellow tipping of the burner 
flames. 

shed). 

 
 

2. The heater does not reach temperature. 

3. The burner makes popping noise during 

use (a slight popping noise is normal 
when the burner is extingui

 

The LP regulator/hose assembly shall be 
located out of pathways where people 
may trip over it or in area where the hose 
will not be subject to accidental damage. 

 

Children and adults should be aware of 
hazards of high surface temperature and 
shall stay away to avoid burns of clothing 
ignition. 

 

Young children should be carefully 
supervised when they are in the area of 
the heater. 

 

Clothing or other flammable material 
should not be hung from the heater, or 
placed on or near the heater. 

 

Any guard or other protective device 
removed for servicing the heater must be 
replaced prior to operating the heater. 

 

Installation and repair should be done by 
a qualified service person, the heater 
must be should be inspected before use 
and at least annually by a qualified 
service person.  More frequent cleaning 
may be required as necessary. It is 
imperative that control compartment, 
burner and circulating air passageways of 
the heater be kept clean. 

 

Keep the appliance area clear and out of 
combustion material, gasoline and other 
flammable vapors and liquids. 

 

Do not obstruct the flow of combustion 
and ventilation air. 

 

Keep the ventilation opening of the 
cylinder enclosure free and clear of 
debris.

   Page 3 

Содержание PTH106-SS



















Отзывы: