Usage - Camera recording
23
EN
Transferring images
Deleting images
• Open the USB cover.
• Plug the mini USB connector of the USB cable
12
into the USB socket
21
.
• Connect the USB cable to the computer.
- The display
29
shows an USB symbol
.
- The inspection camera is detected by your computer as a separate
drive.
• Copy the images to your computer.
• Press the "Playback / display brightness" function switch in the "Camera
recording" mode
5
.
• Select the desired image using the following function switch.
- Function switch "Zoom / UP"
7
.
- Function switch "LED brightness / DOWN"
8
.
• Press the Delete / alignment function switch
4
to
- delete the displayed image either by pressing the Delete / alignment
function switch again;
- to delete all the saved images using the "Camera recording" selection
button
22
;
- or to exit the submenu using the Playback / display brightness function
switch
• Press the Playback / display brightness function switch to exit the
memory.
Seeing images
• Press the "Playback / display brightness" function switch in the "Camera
recording" mode
5
• Select the desired image using the following function switch.
- Function switch "Zoom / UP"
7
.
- Function switch "LED brightness / DOWN"
8
.
