Virax 2535 Series, Руководство пользователя

Страница: 19 / 172

19
EN
3.4 Using the tool
▪ USE THE TOOL THAT IS SUITABLE
FOR YOUR APPLICATION.
A suitable tool will do a good job in complete safety.
▪ DO NOT USE THE TOOL IF THE
SWITCH CANNOT GO FROM ON TO
OFF AND VICE VERSA.
Any tool which cannot be controlled by the switch is dangerous and
must be repaired.
• ALWAYS DISCONNECT THE BATTERY
BEFORE ANY SETTING, CHANGING
ACCESSORIES OR STORING THE
TOOL.
These preventive safety measures reduce the risk of the tool
starting accidentally.
▪ KEEP THE TOOLS IN SAFE, DRY AND
CLOSED LOCATIONS, OUT OF
CHILDREN'S REACH.
DO NOT ALLOW
PEOPLE WHO ARE UNFAMILIAR WITH
THE TOOL OR THESE INSTRUCTIONS
TO OPERATE IT.
The tools are dangerous in the hands of novice users.
▪ OBSERVE TOOL MAINTENANCE.
CHECK THAT THERE IS NO
INCORRECT ALIGNMENT, LOCKING
OF MOVING PARTS OR BROKEN
PARTS BEFORE USE.
Numerous accidents are due to poorly maintained tools. Any
damaged or defective protection, switches or other parts must be
repaired or replaced by a qualified technician.
▪ USE THE TOOL AND ACCESSORIES
ACCORDING TO THESE
INSTRUCTIONS, TAKING ACCOUNT OF
THE WORKING CONDITIONS AND THE
WORK TO BE CARRIED OUT.
Using the tool for operations other than those specified may lead to
dangerous situations. Always respect the machine's capacities,
taking account of the working conditions and the tasks to be
performed. Using the machine other than for the planned usage is
dangerous and invalidates all warranties.
▪ TAKE ACCOUNT OF THE WORKING
ENVIRONMENT.
Do not expose electrical tools to rain or store them in damp or wet
locations.
▪ ONLY USE ACCESSORIES
RECOMMENDED BY VIRAX FOR YOUR
MODEL.
Failure to respect this instruction may present a danger for the user
and invalidate the warranty.
3.5 Maintaining the tool
▪ MAINTAIN YOUR TOOL CAREFULLY.
Keep your tools clean for correct operation.
Clean and grease the rollers regularly.
▪ THE HANDLE MUST BE CLEAN AND
FREE OF OIL.
Keep the tools clean for safe handling.
▪ HAVE THE TOOL MAINTAINED BY AN
APPROVED REPAIR COMPANY USING
ORIGINAL SPARE PARTS.
Failure to respect this instruction may present a danger for the user
and invalidate the warranty.
4 Specific safety instructions
Always wear hearing protections when working with the tool. Noise emitted may cause hearing troubles.
During work, wear protection glasses to avoid projections.
WARNING: Always keep your fingers and hands away from the jaw during the crimping cycle. Lack of application
of this instruction may cause severe body injury.