Virax 138020, Руководство пользователя

Страница: 11 / 89

11
EN
3.4. Using and maintaining the tool
▪
USE THE TOOL THAT IS SUITABLE FOR YOUR APPLICATION. A suitable tool will do a good job in complete
safety.
▪
DO NOT USE THE TOOL IF THE SWITCH CANNOT GO FROM ON TO OFF AND VICE VERSA. Any tool which
cannot be controlled by the switch is dangerous and must be repaired.
▪
DISCONNECT THE PLUG FROM THE CURRENT SOURCE BEFORE ANY ADJUSTMENT OR ACCESSORY
CHANGE OR BEFORE PUTTING THE TOOL AWAY. These preventive safety measures reduce the risk of the
tool starting accidentally.
▪
KEEP THE TOOLS IN SAFE, DRY AND CLOSED LOCATIONS, OUT OF CHILDREN'S REACH. DO NOT
ALLOW PEOPLE WHO ARE UNFAMILIAR WITH THE TOOL OR THESE INSTRUCTIONS TO OPERATE IT.
The tools are dangerous in the hands of novice users.
▪
OBSERVE TOOL MAINTENANCE. CHECK THAT THERE IS NO INCORRECT ALIGNMENT, LOCKING OF
MOVING PARTS OR BROKEN PARTS BEFORE USE. Numerous accidents are due to poorly maintained tools.
Any damaged or defective protection, switches or other parts must be repaired or replaced by a qualified
technician.
▪
USE THE TOOL AND ACCESSORIES ACCORDING TO THESE INSTRUCTIONS, TAKING ACCOUNT OF THE
WORKING CONDITIONS AND THE WORK TO BE CARRIED OUT. Using the tool for operations other than
those specified may lead to dangerous situations. Always respect the machine's capacities, taking account of the
working conditions and the tasks to be performed. Using the machine other than for the planned usage is
dangerous and invalidates all warranties.
▪
TAKE ACCOUNT OF THE WORKING ENVIRONMENT. Do not expose electrical tools to rain or store them in
damp or wet locations.
▪
ONLY USE ACCESSORIES RECOMMENDED BY VIRAX FOR YOUR MODEL. Failure to respect this instruction
may present a danger for the user and invalidate the warranty.
▪
NEVER TRY TO ADJUST OR CHANGE THE ACCESSORIES WITHOUT DISCONNECTING THE TOOL.
3.5. Maintaining the tool
▪
MAINTAIN YOUR TOOL CAREFULLY. Keep your tools clean for correct operation.
▪
THE HANDLE MUST BE CLEAN AND FREE OF OIL. Keep the tools clean for safe handling.
▪
HAVE THE TOOL MAINTAINED BY AN APPROVED REPAIR COMPANY USING ORIGINAL SPARE PARTS.
Failure to respect this instruction may present a danger for the user and invalidate the warranty.
3.6. Specific safety instructions
Read and apply the general safety instructions.
Always use the holding vice while threading: Use the holding vice even when threading small dimensions.
Check the holding vice is mounted perfectly: Improper fastening would result in the machine turning around the
threading head, hence risks for the operator.
Check the power switch: Check the power switch is released automatically when pressure disappears.
Using power extension cables: Do not use a smaller cross-section cable. The extension cable must be as short
as possible. The power extension's capacity must be at least 15 A. It should never be more than 15 metres long.
Do not thread without abundant permanent lubrication. Proper lubrication will extend the lifetime of your machine
and threading heads, while improving threading quality.
Do not change the rotation direction during threading. For left-hand threading, insert the threading head through
the opposite side of the machine and apply a circular movement in the working direction. Once threading
completed, stop the machine and change the movement to move back and release the tube.