VIRATA ATMOS Console, Справочник по командам

Страница: 58 / 248

spanning
48 ATMOS Console Commands Reference Manual (Binary) DO-008530-PS, Draft B (26th April 2001)
4.11 spanning
4.11.1 Syntax
spanning [sub-command]
4.11.2 Description
The spanning tree commands are only available if it has been compiled
in to the bridge.
The following spanning tree sub-commands are available:
Sub-command Description
disable Disables the spanning tree process
enable Enables spanning tree process
event [<level>] Sets the level of event reporting
forwarddelay [<time>]
Reads or sets the time (in seconds) in which the
bridge remains in the listening or learning states
hellotime [<time>]
Reads or sets the time (in seconds) after which
the spanning tree process sends notification of
topology changes to the root bridge
info
Displays the version number of the spanning tree
implementation
maxage [<time>]
Reads or sets the maximum age of received
spanning tree protocol information before it is
discarded
port <number>
Controls the configuration of the bridge’s ports as
far as the operation of the spanning tree protocol
is concerned. Options are:
port <number> disable: disables a port
port <number> enable: enables a port
port <number> pathcost: reads or sets the cost of
using this port
port <number> priority: Reads or sets the priority
of the port
priority [,bridgepriority>]
Reads or sets the priority of the bridge (any value
in the range 0 to 65535)