Installation
2
2.1 Installing Filter on Water Line
Note:
Filter can be adapted to various pipes by using reducing adapters on either end. Installation fittings can be sweated
or threaded. Use galvanized fittings for installation on galvanized pipe.
Procedure:
N O T I C E
Before starting, shut off the main water supply and drain pipes.
1
•
Loose fit all parts and
calculate length of pipe to be
removed.
•
Cut the pipe and install
fittings.
2
•
Screw filter to the adapter
after covering the threads
with Teflon
™
tape and make a
tight connection but do not
over tighten.
Note:
If space is limited
remove sump from head
while making connection.
3
•
Connect and tighten, making
sure filter is in a straight
vertical position.
4
Jumper Wire
Note:
If water pipes are used to
ground electrical system,
appliances, or phone, install a
jumper wire.
5
By-pass section:
•
Can be installed around unit if
desired using either threaded
or sweated fittings.
