Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1
- 22 -
1.4.2
I/O Sensor Testing
Please enter into the MDVR GUI
and select the function “Sensor” (Setup
Î
Event
Î
Sensor). Select "ON“ or “OFF” for
enable option. Define the name according to sensor connected.
EN:
Enable, to active this function
NAME:
Press ENTER on the Name field to display the soft keyboard. Enter the text name to identify the source of each
Sensor connected to the unit.
OSD:
Input the numbers and Characters, they will be embedded into the alarm video files when alarms happen, and it will
also display in live view, Please press
Ǐ
Enter
ǐ
into the soft keyboard. The label also identifies the type of event when
doing a quick search using
EVENT SEARCH
option.
SET:
LOW (normal close) means high to low trigger the alarm. When the sensor input is decreasing from 12V or 24V to 0V,
the sensor alarm is triggered.
HIGH (normal open) means low to high trigger the alarm. When the sensor input is from 0V increasing to 12V or 24V,
the sensor alarm is triggered.
ALARM:
Press ENTER to select between OFF or ON:
ON means when sensor triggered, alarm LED will flashing, until re-login the system with account, the flashing will
disappear, also, if the security set as OFF, I.E no need enter password to re-login, just pressing ENTER can
disappear the flashing.
LOG:
Press ENTER to select YES/NO to enable or disable the input sensor to put as event log file, the EVENT LOG is
recorded in EVENT search file e.g.: If set as ON, using
EVENT SEARCH
option even sensor triggered, there is
event file on this menu.
LOCK:
To enable the event does not erase during the over-write process of hard disk;
Get the video files embed the I/O sensor information and playback on the PC software. Check whether the data is correct.
If the MDVR system supports wireless transmission, please check the alarm report to CMS as well.
1.4.3
Vehicle Speed and Pulse Testing
Please connect the SPEED-A on the alarm box with the vehicle speed signal cable and the GND on the alarm box to the
GND of the vehicle sensor.
Speed adjustment function: input the speed value to SPD before adjustment. P/S value will be obtained automatically.
When vehicle speed is stable (last half minute) and achieve to SPD speed, Please press “CHECK”, P/S will obtain the pulse
