Scroll to
Ǐ
SAVE
ǐ
to make the setting valid.
3.2.1.2 GENERAL
ON/OFF TYPE:
There are ignition, timer and ignition or timer three options. They are the modes to boot up the
MDVR device (not for recording). For example the setting is timer from 5:00~12:00am,
MDVR will startup automatically during this period, but for recording it depends on the setting
in the SCHEDULE and RECORD MODE menu.
A) IGNITION:
for shut down delay function. For example: If you make the shut down delay time is 5 min,
then MDVR will shut down after 5 minutes after the ignition is off.
B) TIMER:
MDVR will boot up or shut down automatically at certain time configured every day.
C) IGNITION OR TIMER:
means include both conditions.
BOOT UP TIME:
The exact time for MDVR starts to work every day.
SHUT DOWN TIME:
The exact time for MDVR shut down every day.
BOOT UP IN RECORDING TIME:
ON means timer start up function is linked to record function if you refer
to boot up the MDVR and start recording at the same time For example,
if the record schedule setup is from 6:00~8:00am, MDVR will boot up
and record automatically (if you setup this time on SCHEDULE
recording menu) during this period even the vehicle ignition is OFF.
BUZZER SWITCH:
ON means the buzzer will alarm when alarm happens, OFF means no audio when
alarm happens.
IDLE TIME (SEC):
How long the operation interface will switch to the QUAD view. If the user does
not make any operation on MDVR GUI for some time, the MDVR system will back
to the QUAD view automatically. We suggest that you please setup this idle time as
your setup demand. Once the MDVR access into the GUI, the MDVR will stop
User's Manual
MVR-704-GUI l v1.1 l 2014.01
ViPRO Corporation
Mobile DVR MVR-704
GENERAL
19
