For TIMER type, if the setting for boot up time is 6:00:00 and shut time is 11:00:00, this means that the
MDVR only work from 6:00~11:00am every day and after 11:00 the MDVR unit will shut down
“
automatically. The
“
shutdown delay
”
function is only for the IGNITION / IGNITION or TIMER setup.
EVENT FILES AUTO-EXPORT (USB):
When this switch is ON, you can back up all the alarm record files of
the current day to thumb drive by press F1 key on remote control.
OUTPUT MODE:
This is the output mode for monitor. There are 4:3 and 9:6 two options,
TRANSPARENCY:
Setup the brightness for the screen display as you want.
Scroll to
Ǐ
SAVE
ǐ
to make the setting valid
3.2.1.3 REGISTER
INFO
UNIT S/N:
The series number for MDVR. One MDVR has only one S/N. This number is read from special
encrypted chip.
UNIT ID:
Device ID. Use the
NUMERIC
keypad on the remote control to enter the system ID from 00000 to
99999. This ID is used to login to the unit (if security is enabled, set as yes).
COMPANY NAME:
The name of company. Press the arrow key on the remote control and highlight this
option and then input the name of the company.
VEHICLE NO.:
The number of the vehicles.
DRIVER/ROUTE NAME:
The driver
’
s name and the route name
DEVICE ID:
This is the unique ID can be recognized for the message server of PC software for MDVR
including CMS (Central Management Software), Ceiba (Ceiba Playback and Analysis Software)
and ADS (Auto Download Software). If you need to connect MDVR to any PC software, please
make sure you have setup this ID for MDVR.
Remark:
when you connect MDVR to PC software, make sure vehicle NO and DEVICE ID is filled,
User's Manual
Mobile DVR MVR-500 Series
REGISTER INFO
20
MVR-500-GUI | v1.1 | 2014.01
ViPRO Corporation
