- 8 -
6.1.3 Camera wiring model
1. Front Camera wiring
The camera should be located in the front hit net. Make sure camera wiring keeps pace
with original vehicle circuit to avoid high temperature part in engine (figure4.1), then goes
into the cockpit following original car wire harness. (figure4.2) finally connects to the host.
Fig6.2 Front camera wiring mode
2. Back Camera wiring
It’s suggested to run the wire following the reverse signal wire of the vehicle or on any place which
does not affecting vehicle’s normal use. (figure4.3). wire should then go into the cockpit (figure4.4) and
finally connect to the host.
Fig6.4 Back camera wiring mode
3. Right left camera wiring
Aware not to affect the functionality of the door glass, and make sure that the camera wire would not be
cut by the up and down-going of the glass. First run the wire following the wire harness of the vehicle
(figure 4.5.), then pull it into the cockpit (figure4.6). Finally connect it to the host.
Fig6.6 Right left camera wiring mode
User Manual - AVM100 l v1.2 l 2014.03
ViPRO by Mobile Cloud Corporation
