-
10
FORCE CONTROLLED WARTHOG - USER'S MANUAL V1.0
Yep you got it right, you’ll need to cut a slot of your base to let go the connector. Don’t worry your
warthog base will sport the scar with pride. There is another way to bypass that modification if you
find it too instrusive, see below.
(add page)
The first thing to do is to mark the cuts. I used tape but a pen works equally fine.
Saw alongside the tape vertically until you meet the flat bottom (don’t go all the way through the
plastic touching the metal) Stop when the connector has enough room to slide through. Repeat on
the other side, alongside the other piece of tape
Cutting the horizontal part is a bit more difficult but here is a modalism trick. Using a precision drill,
bore a few small holes as close to each other alongside the horizontal bit of tape.
