To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
3
SAFETY PRECAUTIONS
GROUNDING INSTRUCTIONS
General – This air mover shall be grounded
while in use to protect the operator from
electrical shock. The machine is provided
with a three – conductor cord and a three –
contact grounding type attachment plug to
fit the proper grounding type receptacle.
The green (or green & yellow) conductor in
the cord is the grounding wire. Never
connect this wire to anything other than the
grounding pin of the attachment plug.
This machine is for use on a nominal 120 –
volt circuit and has a grounding plug that
resembles the plug illustrated in the figure
below. Make sure that the machine is
connected to an outlet having the same
configuration as the plug. No adapter
should be used with this machine.
This machine is intended for commercial
use only. It is constructed for use in an
indoor environment and is not intended for
any other use.
All operators shall read, understand and
exercise the following safety precautions:
1)
Do not operate machine:
•
Unless trained and authorized.
•
Unless you have read and
understand the operators manual.
•
In flammable or explosive areas.
•
With a damaged cord or plug.
•
If not in proper operating
condition.
•
In outdoor areas.
•
In standing water.
•
With the use of extension cords.
2)
Before operating machine:
•
Make sure all safety devices are in
place and operate properly.
3)
When using machine:
•
Do not pull machine by cord or
plug.
•
Do not pull cord around sharp
edges or corners.
•
Do not unplug machine by pulling
on the cord.
•
Do not stretch cord.
•
Do not handle plug with wet hands.
•
Keep cord away from heated
surfaces.
•
Report machine damage or faulty
operation immediately.
4)
Before leaving or servicing machine:
•
Turn off machine.
•
Unplug cord from outlet.
5)
When servicing machine:
•
An experienced technician should
only perform service work.
•
Unplug cord from outlet.
•
Use manufacturer supplied or
approved replacement parts.
