USER MANUAL
ENGLISH
41528EU(1)2008-12 A
DR1500H-EU
9
OPERATION OF ULTRA HIGH SPEED FLOOR MACHINE
BASIC OPERATION
1]
Remove any obstructions or other obstacles in the area which is to be cleaned.
2]
Place handle in upright position and tilt machine back until handle rests on the floor.
*Be sure the machine is not plugged into an outlet.
3]
Remove the pad center gripping device by unscrewing the thumbscrews.
4]
Place appropriate burnishing pad on pad driver and re-attach the center gripping device.
5]
Place machine back into its upright position.
6]
Plug power cord into grounded outlet.
*Do not use an extension cord in conjunction with the standard power cord.
7]
Adjust the handle (switch housing) height to a comfortable operating position.
8]
To start the machine, push on the Red safety button of the top of upper switch housing and squeeze either of the
switch levers.
9]
When the machine is in operation, both hands should be placed on the handle (switch housing).
10] To stop the machine at any time, simply release the switch lever, and the machine will stop automatically.
MAINTENANCE
To keep the machine performing well for many years, please follow the following maintenance procedures.
* Always confirm that the machine is unplugged prior to performing any maintenance or repairs.
1]
Unplug machine as soon as you are not using it.
2]
Clean the outside of the machine with a mild cleaner.
3]
Check power cord for any damage. If any damage is detected, replace the cord immediately.
4]
Lubricate wheels with a water resistant lubricant every month.
5]
Check machine for loose or missing nuts and bolts, and replace as necessary.
6]
If the machine is used in a dusty environment, you may remove the motor cover and blow the motor clean with
compressed air. This will allow for good ventilation and help the motor run cooler.
STORAGE
1]
Unplug machine from power source.
2]
Store in upright position in a dry area.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
