Viper d1200.1, Руководство пользователя

Страница: 11 / 24

11
© 2002 Directed Electronics, Inc
TOP PANEL CONTROLS
FIGURE 4—AMPLIFIER CONTROLS TOP
6
1. IInnppuutt GGaaiinn AAddjjuussttm meenntt - Controls
the amplifier’s sensitivity and is
used to match the input level of the
amplifier to the output level of the
signal source.
2. CCrroossssoovveerr FFrreeqquueennccyy AAddjjuussttm
meenntt -
Adjusts the crossover point for the
on-board active crossover.
3. VVaarriiaabbllee BBaassss EEQQ - Adds 0 to12db
of additional boost to the
subwoofer output when active.
4. SSuubb PPhhaassee AAddjjuussttm meenntt - Controls
the phase of the subwoofer output
from 0 to 180 degrees.
5. SSuubbssoonniicc FFrreeqquueennccyy AAddjjuussttm
meenntt -
Adjusts the cutoff point for subsonic
frequencies. Frequencies below the
adjustment point will be attenuated
by 24db per octave.
6. VVaarriiaabbllee SSuubbssoonniicc FFiilltteerr SSw wiittcchh -
Turns the variable subsonic filter
control on/off.
4
1
2
3
5