Viper 5606V, Руководство пользователя

Страница: 28 / 42

24
© 2016 Directed. All rights reserved.
For Pit Stop Mode (to leave the engine running after arming),
open the driver door.
2.
Release
the foot brake. As long as the engine is running there is
no time limit to perform this step.
3. Within 20 seconds of foot brake release, press any command
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode,
press
the optional dash mounted activation button
or send the Timer Mode command.
4. The parking lights flash several times to confirm MTS Mode is
enabled and the remote start activates the ignition outputs.
5. Turn Off and remove the key from the ignition switch, the engine
remains running.
6.
Exit
the vehicle,
close
all the doors and
arm
the system.
7. The engine turns off. If the door is opened in Step 1, then the
engine continues to run.
Turbo Timer Mode
The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
1. With the engine running,
set the parking brake.
2.
Press
the optional dash mounted activation button or perform
the Timer Mode command (for manual transmission vehicles see
previous MTS Mode section).
3. The parking lights turn on and the remote start activates the igni-
tion outputs.
4. Turn Off and remove the key from the ignition switch, the engine
remains running.
5.
Exit
the vehicle,
close
all the doors and
arm
the system.
6. The engine runs for the Turbo Mode runtime.