24
© 2010 Directed Electronics. All rights reserved.
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command.
4. The parking lights flash 5 times to confirm MTS mode is enabled
and the remote start activates the ignition outputs.
5.
Turn
Off and
remove
the key from the ignition switch, the engine
remains running.
6.
Exit
the vehicle,
close
all the doors and
arm
the system.
7. The engine turns off. If the door is opened in Step 1 then the
engine continues to run.
Turbo Timer Mode
The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
1. With the engine running,
set
the parking brake.
2.
Press
the optional dash mounted activation button or perform the
Timer Mode command.
3. The parking lights turn on and the remote start activates the igni-
tion outputs.
4.
Turn
Off and
remove
the key from the ignition switch, the engine
remains running.
5.
Exit
the vehicle,
close
all the doors and
arm
the system.
6. The engine runs for the Turbo Mode runtime.
Note
Turbo Timer must be turned on by an authorized Directed
dealer.
