background image

34

© 2010 Directed Electronics. All rights reserved.

Before remote starting a manual transmission vehicle, be sure to:

s

Leave the vehicle in neutral and be sure no one is standing in front or 
behind the vehicle.

s

Only remote start on a flat surface

s

Have the parking brake fully engaged

WARNING!

 It is the responsibility of the owner to ensure the parking/emer-

gency brake properly functions. Failure to do so can result in personal injury or 
property damage. We recommend the owner have the parking / emergency 
brake system inspected and adjusted by a qualified automotive shop biannu-
ally.

Use of this product in a manner contrary to its intended mode of operation may 
result in property damage, personal injury, or death. (1) Never remotely start 
the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle 
with the keys in the ignition. The user must also have the neutral safety feature 
of the vehicle periodically checked, wherein the vehicle must not remotely start 
while the car is in gear. This testing should be performed by an authorized 
Directed dealer in accordance with the Safety Check outlined in the product 
installation guide. If the vehicle starts in gear, cease remote start operation im-
mediately and consult with the authorized Directed dealer to fix the problem.

After the remote start module has been installed, contact your authorized dealer 
to have him or her test the remote start module by performing the Safety Check 
outlined in the product installation guide. If the vehicle starts when performing 
the Neutral Safety Shutdown Circuit test, the remote start unit has not been 
properly installed. The remote start module must be removed or the installer 
must properly reinstall the remote start system so that the vehicle does not start 
in gear. All installations must be performed by an authorized Directed dealer. 

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN 

Содержание 5104 1-Way










































Отзывы: