Viper 50000605, Инструкция по эксплуатации

Страница: 23 / 33

INSTRUCTION FOR USE ENGLISH
20
MACHINE STORAGE DURING LONG INACTIVITY
If the machine is not going to be used for more than 30 days, proceed as follows:
1.
Perform the procedures shown in After Using the Machine chapter.
2. Disconnect the battery connector.
FIRST PERIOD OF USE
After the first 8 hours of use, check the machine fasteners and connecting parts for proper tightness and check the visible parts for
integrity and leakage.
MAINTENANCE
WARNING!
Maintenance procedures must be performed after the machine is turned off and the battery charger cable is
disconnected. In addition, carefully read the safety chapter in this instruction.
All scheduled or extraordinary maintenance procedures must be performed by qualified personnel or an authorized Service Center.
This manual only describes the general and common maintenance procedures.
For other maintenance procedures that are not in below maintenance schedule table, please contact our Technical Support Department.
SCHEDULED MAINTENANCE TABLE
Procedure
Upon
delivery
Every 10
hours
Every 50
hours
Every 100
hours
Every 200
hours
Every 400
hours
Battery charging (1)
Battery (WET) electrolyte level check (2)
Main broom cleaning
Side and main broom height check and adjustment
Dust filter cleaning and integrity check (3)
Blade height and operation check
Filter shaker operation check (*)
Main broom drive belt visual inspection (*)
Flap pedal check and adjustment (*) (4)
Steering chain check and cleaning (*)
Main broom drive belt replacement (*)
Main broom motor and drive system motor carbon brushes
check or replacement
(*)
1. (*) For relevant procedures, refer to the Service Manual.
2. Daily or after using the machine.
3. Or before machine start-up.
4. Or more frequently in dusty areas.