Viper 160XV, Руководство по установке

Страница: 36 / 43

3 36 6
© 2005 Directed Electronics—all rights reserved
necessary to program this feature off.
2 2--1 13 3 D DIIEESSEELL TTIIM MEER R— —W WA AIITT--TTO O--SSTTA AR RTT/15, 30, 45 SSEECCO ON ND DSS:: Default is the “Wait-to-Start” input control
wire, or programmable to ignore the input control wire by a delay of 15, 30, or 45 seconds. This feature
can be also programmed with the Bitwriter® and with a delay from 1 to 90 seconds.
2 2--1 14 4 R RU UN N TTIIM MEE ((TTIIM MEER R M MO OD DEE))— —1 12 2,, 3, 6, 9 M MIIN NU UTTEESS:: Selects the time in minutes that the system will
operate the engine until the system "times out". This is the maximum operation period and the system
may be shut down using a shutdown at any time. Using the Bitwriter®, the run time can be programmed for any
duration from 1-16 minutes.
ttaacchh lleeaarrnniinngg
To learn the tach signal:
1. Start the vehicle with the key.
2. Within 5 seconds, press and H
HO OLLD D the Valet/Program switch.
3. The LED will light constant when the tach signal is learned.
4. Release the Program switch.
sshhuuttddoowwnn ddiiaaggnnoossttiiccss
The unit has the ability to report the cause of the last shutdown of the remote start system.
TTo o een ntteerr d diiaag gn no ossttiicc m mo od dee::
1. Turn the ignition off.
DRW-96