VIPA System 300S IM 353-1DP01 Скачать руководство пользователя страница 45

Страница: 45 / 52

Manual VIPA System 300S

Chapter 3 Deployment

HB140E - IM - RE_353-1DP01 - Rev. 14/46

3-23

Diagnostic functions

PROFIBUS DP provides an extensive set of diagnostic functions for quick

error localization. Diagnostic messages are transferred via the bus and

collected by the master.
At the DP-V1 the device related diagnostic has been im proved as further

function and is subdiv ided into the categories interrupts and status

messages.
Additionally in the DP-V1 slave from VIPA the last 100 interrupt messages

are stored in a RAM res. in t he flash with a time stamp and may be

evaluated with a software.
For this, please call the VIPA hotline!
In addition you can access diagnostic data using the DP-V1 services.

At DP-V0 and DP-V1 there are identical diagnostic structure and behavior.

The only difference consists of the fact that with employment in a sy stem

300 with a hardware interrupt at DP-V0 the OB 82 and w ith DP-V1 the

OB 40 is called.

The system also stores diagnostic messages like the states "Ready" res.

"DataExchange" that are not passed on to the master.
With every status change between "Ready" and " DataExchange" the

PROFIBUS slave stores the diagnostic-RAM content in a Flash- ROM and

writes it back to the RAM at every reboot.

With the short setting of 00 at the address lever you may save the

diagnostic data in the Flash-ROM during "DataExchange".

At voltage failure res. decreasing voltage a t ime stamp is st ored in t he

EEPROM. If enough voltage is still left, a diagnostic output to the master

occurs.
At the next reboot an under voltage/shut-down diagnostic message is

generated from the time stamp of the EEPROMs and is stored in the

Diagnostic-RAM.

Overview

Difference
diagnostic
DP-V0 and DP-V1

Internal diagnostic
system messages

Manual storage of
diagnostic data

Diagnostic
messages at
voltage failure

Содержание System 300S IM 353-1DP01





















































Результаты поиска

Содержание System 300S IM 353-1DP01

Отзывы:

Бренды по названию

Популярные бренды

VIPA System 300S IM 353-1DP01, Руководство пользователя

Результаты поиска

Содержание System 300S IM 353-1DP01

Отзывы:

Бренды по названию

Популярные бренды