VIPA SLIO 001-1BA00, Руководство пользователя, Страница: 19 / 48

Manual VIPA System SLIO
Chapter 1 Basics and Assembly
HB300E - PS-CM - Rev. 11/28 1-11
•
For mounting turn the locking lever of the module to be mounted
upwards.
•
To mount the module put it to the gap between the both modules and
push it, guided by the stripes at both sides, to the mounting rail.
•
Turn the locking lever downward again.
•
Plug again the electronic module, which you have removed before.
4 5
6
Bus interface and power module of a head module may not be
separated! Here you may only exchange the electronic module!
•
Remove if exists the wiring of the head module. More about this may be
found at "Wiring".
•
Press the unlocking lever at the lower side of the just mounted right
module and pull it forward.
•
Turn all the locking lever of the head module to be exchanged upwards.
•
Pull the head module forward.
1
2
Exchange of a head
module
(e.g. bus coupler)