background image

Enables or disables the serial port.
Disabled - Serial port is not available
Enabled - Serial port is available

Selects an optimal setting for the super IO device.

This field is used to configure the mode of serial port 0 as RS232,

RS422, RS485 or RS485 AUTO.

This section is used to configure serial port 1.

Enables or disables the serial port.
Disabled - Serial port is not available
Enabled - Serial port is available

Selects an optimal setting for the super IO device.

This field is used to configure the mode of serial port 1 as RS232,

RS422, RS485 or RS485 AUTO.

Enabels or disables the terminal resistor for RS422 and RS485.
Disabled - Terminal resistor not activated
Enabled - (default) Terminal resistor activated

This section "PC Health Status" is used to configure the hardware

temperature and voltages.

Serial Port

Change Settings

Onboard Serial Port 0

Mode

Submenu "Serial Port 1

Configuration"

Serial Port

Change Settings

Onboard Serial Port 1

Mode

Terminal resistor

H/W Monitor

VIPA HMI Panel PC

BIOS setup

Advanced

HB160 | PPC | 67S-PNL0 | GB | 14-24

 

40

Содержание PPC 67S-PNL0
























































Отзывы: