VIPA CP143 TCP/IP, Руководство пользователя

Страница: 190 / 210

Example CP143
H1 / TCP/IP manual
6-30 Rev. 00/07
Re: 5. Transfer base data to the CP
You can select one of two methods to transfer the base data into the CP: you may write the data to
an EPROM or you may transfer the data via the LAN or the serial interface to the respective CP.
Here we will transfer the data directly via the LAN. To do this, the TCP/IP-stack of ftp-Software
must be up and running.
Load the data base CP1.NCS for station 1. Check the data by selecting the respective window from
Init and connection (Verbindungen). If the data is correct you may transfer it to the CP. Select the
function Database (Datenbasis)
↔
CP from the menu item Transfer and the dialogue window for
remote configuration will be displayed:
Fig. 6-22: Remote configuration
Select TCP/IP and enter the IP address of station 1 under remote IP addr. Press the “Enter” key or
click on [OK]. You are now in control of the CP if the address is valid and if the station exists on
the LAN.
STOP the CP to start the transfer of data. Request the status from the CP to check your actions.
In this example we will transfer the data directly from the NCS. Click on the button [NCS
→ → → →
CP].
Once you have verified your action the data will be transferred directly to the CP. The connections
will be activated when you change the CPs status back to RUN.
Use the same method to transfer the database into the CP of station 2. The data communication link
will be activated as soon as the data has been transferred and both CPs are RUNning.
You may now monitor the configured connections by means of the VIPA-MC5 package. The
respective actions are described in chapter 6.4.6.