For example
net view testserver
lists all shared resources of
the network PC "test server". To test the physical connection a PING
to the IP address of the network PC may be executed if there are
problems while contacting the network PC.
The connection of a local name at the Touch Panel with a shared
drive of the network PC happens with the following approach:
1.
Enter the following in the command prompt: \>
net use
local_name \\network drive /user:User name
2.
Enter
user name, password
and where app.
user group
.
After successful login the following message appears:
‘Successfully
mapped to network name’
.
The connected network drive is then available on the Touch Panel
with the
local_name
via
My Device
at
Network
.
Local_Name:
data
, network drive:
testserver\archive
, User-
name:
guest
Input:
\> net use data \\testserver\archiv /
user:guest
The connected network drive is then available via \network\data at the
Touch Panel.
The configuration of a network printer happens with the following
approach:
1.
Enter this command into the command prompt: \> net use printer
name network printer
Example:
Printer name: Printer, network printer: \\testserver\printer
Entry: \>
net use printer \\testserver\printer
2.
Enter
user name
,
password
and if necessary
user group
.
After the successful login the following message appears
Successfully mapped to network printer
The printer may now be accessed as "network\printer".
For example you may print the content of the current directory using
\>
dir > network\printer
.
Connect net drive
Example:
Configure network
printer
Test print
VIPA HMI Touch Panel
Deployment under Windows CE 6.0 Prof.
Access to the network resources
HB160 | TP-ECO | 62K-NHC0 | GB | 14-27
65
