VIPA 62K-NHC0, Руководство пользователя

Страница: 48 / 75

n Backup
n Exit
n Back
In [Settings] under Change Settings you can set a password fpr the
Startup-Manager. The password will be requested when interrupting
the start countdown or before closing the Startup-Managers by "Exit".
By default, no password is defined. In Control Panel [Open...] the
system settings like brightness of the display can be preset or the dis-
play can be re-calibrated. Here the MPI/DP slave interface may also
be configured. Further you get here the Touch Panel information:
product number, serial number and licenses.
To execute the firmware update press the button [Info/Update]. After
clicking on [Info/Update] the current image is displayed under "image
version" with panel name, creation date and version number.
With [Make Screen Shot] you can make a screen shot of the panel
information and select a destination for its storage.
With [Search Image] a list of all the firmware images is shown, which
are available on the panel and connected storage media. These
images will be listed with create data and version number. Choose
your new image.
If the select image is not suited for your panel, an error massage
appears. If the image is suited for your panel, in the following mes-
sage the current installed image version and the new selected image
version are listed.
1. Click on [Make Image Update] to execute the update. This can
take a few seconds.
2. In the following window click on [Finish] to end the update.
ð
Then the display gets dark.
3. Switch the power supply off the panel off and on.
ð
After the restart the calibration window is opened.
4. Re-calibrate the panel as described. After calibration tap any-
where on the screen.
ð
The calibration window will be closed.
5. Via ‘Start è Settings è Control Panel’ start the program AutoR-
unMaker . Ä Chapter 4.4 ‘Installation Movicon and Startup-Man-
ager’ on page 50
With [Autostart] you define which runtime and which project will be
started automatically together with the panel startup.
Settings
Info/Update (firmware)
Autostart
VIPA HMI Touch Panel Deployment under Windows CE 6.0 Prof.
Commissioning> VIPA Startup-Manager
HB160 | TP-ECO | 62K-NHC0 | GB | 14-27 48