background image

 

User Manual 

 

Page 49 of 76 

 

 

•    Internet DDNS(Dynamic Domain Name Service) 

When using the high-speed Internet with the telephone or cable network, users can operate the 
Network Camera even on the floating IP environment in which IPs are changed at every access. 

Users should receive an account and password by visiting a DDNS service like 

http://www.dyndns.com/

, or 

http://www.cctv-network.co.kr/

 
 

-. 

Enable DDNS:

   

 

Check to get DDNS service to be available. 

   

DDNS Server:

 Select the DDNS server. 

 

Registered host:

 Enter an address of the DDNS server. 

 

Username:

 Enter an ID to access to the DDNS server. 

 

Password:

 Enter a password to be used for accessing the DDNS server. 

 

Confirm:

 Enter a password again to confirm it. 

Maximum time interval:

 Set a time interval to synchronize with the DDNS server. Select an 

item in the interval drop-down list. 

 

Register local network IP address:

 Register a Network Video Server IP address to the       

 

DDNS server 

 
 

7) UPnP 

 

The NVR 

includes support for UPnP™. UPnP™ is enabled by default, and the NVR then is 

automatically detected by operating systems and clients that support this protocol.   
 
 

 

Содержание VK2-REC16HD





















































































Отзывы: