background image

Solar Surveillance Installation Manual - Version: VIPSLRB-Q121

22

Problem

Troubleshooting

Cannot connect to camera remotely

• 

Ensure a SIM card is installed that is activated, and has data remaining on it. 
(4G Models)

•  Ensure solar panel is charged, and there is power to the modem and cam-

era

Camera only recording during day-
light hours

• 

Check camera schedule settings

•  Ensure solar panel charge settings are correct
• 

Ensure there is no objects shading the solar panel, such as trees

•  Ensure the solar panel is clean

No communication to solar panel 

remote control

Send failed from solar panel remote 
control

•  Move remote closer to solar panel sensor
•  Ensure the device number on the remote is set correctly, it will be either 

PCC_G05 or PCC_G04

, depending on the model of panel.

Camera login details incorrect

•  Contact your supplier for assistance

Unable to playback footage

• 

Ensure that the playback type is set to 

Main.  

(Section 4.2)

• 

Ensure the recording schedule is setup correctly

• 

Ensure an SD card is installed in the camera, by checking with Smart PSS

6. Troubleshooting

Содержание SLR-B Series

























Отзывы: