10
2. Seek Control
This shows the recorded data for the selected day.
Normal recording in green
,
Alarm recording in red
and
Motion recording in yellow.
Clicking on any part of the recorded data will jump to that time.
This control is made up of 1-4 bars, which correspond to each camera channel currently viewed.
3. Playback Mode
Display only recordings of the selected type(s).
4. Search Type
Select whether to search from hard drive or external source.
Select whether to search recordings or snapshots.
5. Calendar
Select which day to review recording.
6. Channel Selection Pane
Choose how many feeds should be present on screen and enter fullscreen mode.
7. Card Number Search
This button is not active on this version of the device.
8. File List Switch
Show File List menu.
From here you can search for individual recorded files, entering a date into the search bar at the top
will limit the search to all file recorded
after that time
, on the day selected in the
calendar
control
(see above). The letter
R
/
M
/
A
next to the file indicates a
Regular
/
Motion
Detect
/
Alarm
recording respectively.
Checking the boxes next to these files and pressing the ‘save’ button in the
Clip and Save
control
(below) will back up the selected file on disk.
9. Clip and Save
Use this control to save a single clip from the recordings.
Clicking the ‘
clip’
button will automatically select everything visible in the seek control.
You may then adjust the times of this clip using the time controls.
Clicking the ‘
save’
button will then save this portion to disk.
10. Time Bar Period
You may adjust the size of the time bar in this control to show only 24hrs/2hrs/1hrs/30mins of
recording surrounding the current time of recording being shown.
