Vip-Vision INTIPRKIT, Быстрое руководство по установке

Страница: 7 / 32

7
System Structure A
– Standalone 1 to 1 by direct connection
This configuration requires only a single Cat5e network cable to run directly from the Indoor Monitor to
the Door Station.
- Very Simple System Structure
- Plug and Play, no set up required.
- Uses a default IP Address range.
- Each Indoor Monitor and Door Station will require their own 12vDC power supply.
1. Install each unit at their respective location and connect to the shared Cat5e network cable.
2. Power on the Door Station
3. Power on the Indoor Monitor
4. You have now successfully set up your VIPvision Intercom System.