Vip-Vision INTIPRKIT, Быстрое руководство по установке

Страница: 25 / 32

25
Advanced Configuration of your Intercom for Remote Access (optional)
In order to connect the Intercom system for remote access, the Intercom system will need to be
connected to the local computer network and use the same IP Address range.
To be able to set your Intercom up for Remote Access, you will first require:

An ADSL internet connection of 512/512 minimum (ADSL2 or NBN recommended).

An ADSL Modem which supports Port Forwarding (such as Sapido, D-link or Netgear).
 An “External static IP address” from your Internet Service Provider.
 An “Internal Static IP address” from your Modem.

A network cable between your Intercom switch and your Modem.

A windows PC on your network to configure your Modem.
Once you have these you can proceed to set up the Remote Access by:
1. Port forward ports 37777, 3800
in the modem, to the “Internal IP address” of the Intercom.
2. You should then be able to test the connection to the Intercom over the internet from a different
internet connection (or mobile on 3G).
Test your Remote Access by connecting to the Intercom from the mobile app:
When you are in the same building as the Intercom you will be able to connect via WIFI and use the
“Internal IP address” of the Intercom. However when you are not where the Intercom is and wish to
connect via the internet or 3G, you would use the “External static IP address” given to you by your
Internet Service Provider.
Port forwarding support:
There are many different brands and models of ADSL Modems which makes them difficult to set up, this
is why we must recommend an IT professional. Some manufacturers offer guides on their websites or
alternatively we can recommend Third-party assistance on configuring port forwarding from sites such as:
www.portforward.com
Important: Before Setting up remote access for your Intercom, you will need a good understanding of
computer networks. If you do not, please seek the assistance of a qualified I.T. professional.