VIP Residential IP Intercom Installation Guide - Issued January 2017
11
This configuration allows you to connect your Indoor Monitor and Door Station together, and provide them
with network access.
Cat5 cable will need to be run between the Indoor Monitors, Door Station, and Network Switch. 12V DC power
must be provided to both the Door Station, and Indoor Monitors. A Cat5 cable will need to be connected from
the Network Switch to your existing computer network.
In this example, we will be changing each devices IP address.
Device
IP Adresses
Subnet Mask
Gateway
Room Number
Door Station
10.1.1.110
155.155.155.0
10.1.1.1
Master Indoor
Monitor
10.1.1.111
255.255.255.0
10.1.1.1
9901
Extension Indoor
Monitor
10.1.1.112
255.255.255.0
10.1.1.1
9901-1
2.3
2 Indoor Monitors to 1 Door Station via a Network Switch
+ / -
12VDC
+ / -
12VDC
+ / -
12VDC
Power
Cat5e
Indoor Monitor
Indoor Monitor
Door Station
Switch
1.
Install each unit at their respective location and connect the Indoor Monitors and Door Station with a Cat5
cable, to the Network Switch.
2.
Connect a Cat5 cable from the Network Switch, to your existing computer network.
3.
Connect the 12V DC power supply to both the Door Station, and Indoor Monitor.
4.
Once the Master Indoor Monitor has powered on go to “Settings” > “Project Settings” > then enter password
888888
.
