background image

10

6. Use of mop module

Note:

• Please do not use the mopping mode on any carpet.

• It is recommended to wash the mopping cloth after each mopping.

• When the machine is being charged or idle, please remove the mop 

module.

• In order to achieve better mopping results, it is recommended to 

sweep your floor with the machine before installing the mop module.

• To avoid damaging your wood floor, please make sure to take out 

the mop module immediately after floor mopping is complete. Or 

install the charging dock onto the waterproof pad (optional).

• When mopping is paused or finished, the machine will automatically 

cut off water. However, the mopping cloth remains wet and should 

not be left in place for too long but removed in time.

• Do not use any detergent, disinfectant or solid cleaning agent, 

which may corrode or block the 2-in-1 tank. Clean the nozzle filter 

regularly. 

• Do not rinse or soak the tank! Do not fill the tank with hot water, 

which may cause it to deform.

• When filling up with water, be sure to remove the tank separately, 

and fill it only with clean water at small flow rate through the inlet. 

• Due to quality testing there may be a little water in the tank, which 

is acceptable.

① 

Install the charging dock on the waterproof pad (optional).

② 

Take out the water tank and add water.

③ 

Install the mopping cloth on its holder, and then install the holder

to the machine bottom. (In order to ensure mopping results, the 

machine's obstacle-crossing performance will be reduced after the 

mopping cloth is put in.)

④ 

 Select a sweep mode to start sweep, and select the amount of 

mopping water (3 levels) in the app as necessary. (To prevent the 

machine from wetting any of your carpets when mopping your floor, 

it is recommended to place virtual wall (for no mopping) around 

carpet areas using the app to protect your carpets)

⑤ 

When the machine returns to the charging dock after completing 

its work, hold buckles on both sides by hand and drag backward to 

remove the mop module.

A

B

A

B

C

Содержание V3 Max























Отзывы: