Viola Systems Symphony Скачать руководство пользователя страница 14

 

Viola Symphony Manual Rev 1

                         

14 of 15

                                    

9

th

 September 2005  

  SERVICE 

 

Customers Within the USA

 

In the first instance please contact your local  VIOLA dealer.  Should they be unable 
to assist  you, please contact  VIOLA by phone on 1-203-772-0435, by fax on 1-203-
772-0569, or by email at service@Viola labs.com. Please supply as much information 
about the problem as possible, including the unit’s serial number and details of all 
equipment in the system when the fault occurs.

 

If it becomes necessary to return your unit to the factory, you will be given a Return 
Authorization (RA) number.  This number must be clearly marked on the outside of 
the shipping box. Returns without a RA number will not be accepted.  Returns 
received in non-standard packing will be replaced with new packing at the owner's 

expense.  If you need new packing, please contact your VIOLA dealer or the factory.

 

For units returned to the factory under warranty during the first year, VIOLA will pay 
for the freight charges both ways.   A   VIOLA approved shipping company must be 
used and the units will be returned to the customer using the same carrier, or an 

equivalent servic e.

 

For units returned to the factory under warranty during years 2 to 5, the customer is 
responsible for paying the shipping charges back to the factory. A VIOLA approved 
shipping company must be used.  Providing this condition is met, VIOLA will pay the 
cost of shipping the units back to the customer. 
 
VIOLA will not pay freight costs if units are returned without a  RA number, or if no 
fault is found.  Customers are responsible for all freight charges for units returned for 
non-warranty repairs

.

 

 

Customers Overseas 

Please contact your local  VIOLA dealer, or the official  VIOLA distributor in your 
country. If they are unable to assist you, please contact VIOLA by phone on 1-203-
772-0435, by fax on 1-203-772-0569, or by email at service@Viola labs.com.  Please 
supply as much information about the problem as possible, including the unit’s serial 
number and details of all equipment in the system when the fault occurs. Should it 
become necessary for you to return your unit to VIOLA directly, the same conditions 
as apply for US customers must be observed regarding freight charges and obtaining 
Return Authorization numbers. 
 
 

  CONTACTING VIOLA 

 
Should you need to contact VIOLA, please note that our office hours are 8 a.m. to 4 
p.m. EST and that we cannot respond to telephone enquiries outside of these hours. 

 

 

Address

   

315 Peck Street 
New Haven, CT 06513 
USA

 

Telephone 

Fax  

Email

 

 

1 203 772 0435 
1 203 772 0569 
[email protected]

 

Содержание Symphony
















Отзывы: