Vinvautz VZ110SDUG, Инструкция по эксплуатации

Страница: 11 / 36

11
OTHER FUNCTIONS

To switch between °C and °F
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the UP(+)
and DOWN(-) button on either upper or lower zone at the same time for 3 seconds.

Attention
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restart the
unit.
If you need attempt to restart before this time delay, the wine cellar will not start.
For first time use or longer absence of using, the temperature will difference between setting and
LED display temperature. After running a certain period, the temperature will be reverted.

Temperature Memory Function
If the power is suddenly lost, the set temperature will be saved by the unit.
Once the power is back on, the unit will be at the same actual temperature.

Temperature Alarm Function
If the interior temperature is higher than 23°C (73°F), “HI” is shown on the display panel and the
buzzer alarm sounds continuously after one hour. This indicates that the inner temperature is too
high, please look for the reason. If the inner temperature is lower than 0°C (32°F), “LO” is shown on
the display panel; the alarm and the malfunction indicator light turn on at the same time.

Door Lock
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the instruction manual. Insert the key into
the lock and turn it counterclockwise to unlock the door. To lock the door, do the reverse operation
making sure metal pin is engaged completely. Remove the key and place it in a secure place for
safekeeping.
Note: During periods of high humidity, condensation may appear on outside surfaces of the
appliances.
This condensation will disappear once humidity levels drop. To prevent, it is recommended to install
the appliance with sufficient ventilation in a dry and/or an air-conditioned room. Please ensure that
doors are closing and sealing properly.

To remove the shelves:
•
To prevent damaging the door ga
sket, make sure to have the door all the way opened when
pulling shelves out of the rail compartment.
• To Remove Shelves:
1. Fully extend the shelf you wish to remove (Fig. A)
2. Pull the shelf towards you until the buckle is released. (Fig. B)
3. Holding the shelf track with both hands, push the shelf up horizontally (Fig. C)