Vinvautz VZ07BI, Руководство пользователя

Страница: 10 / 18

10
USE AND CONTROL
The Controls of Your Unit
POWER
To turn the appliance on/off, press and hold the
key for 5 seconds.
NOTE: Pressing the key once can switch off the
audible alarm when the alarm is on.
LIGHT
Used to turn the inner light on/off.
UP
Used to increase (warm) the set temperature by
1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by
1°C/1ºF.
Display
Display the digital temperature and service
indicators.
Indicator Light
The indicator light is located at the right lower corner
of the display. The indicator light will be on when the
multi-key function is selected. To perform the multi-
key function, press and hold the first key, then press
the rest key for at least 5 seconds and then release
all the keys.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit
or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit,
press and hold the
LIGHT key for 5 seconds.
Setting the Temperature Control

The unit has single temperature zone. The
temperature can be set between 5ºC and 22ºC
(41ºF and 72ºF) which is ideal for storing red,
white or sparkling wine.

When the unit is plugged in for the first time, the
unit will power up automatically to the preset
defaults. The temperature preset at the factory
is 12°C (54ºF).

You can set the temperature as required by
pressing the
UP or DOWN key. When you
press the two keys at the first time, the display
will show the last temperature set previously.
The temperature will increase 1°C/1ºF if you
press the
UP key once, or the temperature will
decrease 1°C/1ºF if you press the DOWN key
once. The display flashes while you make the
setting.
NOTE:

When you use the appliance for the
first time or restart the appliance
after
having been shut off for a long time,
there could be a few degrees variance
between the temperature you select
and the one indicated on the LED
readout. This is normal and it is due
to the length of the activation time.
Once the unit is running for a few
hours everything will be back to
normal.

If the unit is unplugged, power lost, or
turned off, you must wait 3 to 5
minutes before restarting the unit. If
you attempt to restart before this time
delay, the unit will not start.