Vinvautz Pro Black Series, Руководство пользователя

Страница: 9 / 20

9
OPERATING YOUR WINE
CELLAR
This Wine Cellar is designed for operation at certain
ambient temperatures. The climate class is specified on
the rating plate.
The Wine Cellar may not work properly if it is left for a
long period at a temperature outside the specified range.
For example, placing your Wine Cellar in extreme cold or
hot conditions may cause interior temperatures to
fluctuate. The range between 5ºC and 22ºC (41ºF and
72ºF) may not be reached.
Climate class Ambient room temperatures
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
USE AND CONTROL
The Controls of Your Wine Cellar
POWER
To turn the Wine Cellar on/off, press and hold the key
for 5 seconds.
NOTE: Pressing the key once can switch off the
audible alarm when the alarm is on.
UP
To increase (warm) the set temperature by 1°C or 1ºF.
DOWN
To decrease (cool) the set temperature by 1°C or 1ºF.
LIGHT
To turn the inner light on/off.
Display
Display the digital temperature and service indicators.
is for UPPER temperature zone and is for LOWER
temperature zone.
Indicator Light
The indicator light is located at the right lower corner of
the display. The indicator light will be on when the multi-
key function is selected. To perform the multi-key
function, press and hold the first key, then press the rest
key for at least 5 seconds and then release all the keys.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or
Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press
and hold the
LIGHT key for 5 seconds.
Setting the Temperature Control
•
The Wine Cellar has two separate temperature zones.
The temperature of both zones can be set between 5ºC
and 22ºC (41ºF and 72ºF). The LOWER temperature
zone is ideal for storing white and red wine at a setting
of 13°C to 22°C (55°F to 72°F). The UPPER
temperature zone is suitable for storing champagne
and white wine at a setting of 5°C to 13°C (41°F to
55°F).
•
When the Wine Cellar is plugged in for the first time,
the Wine Cellar will power up automatically to the
preset defaults. The preset temperature at the factory
for UPPER temperature zone is 10ºC (50ºF) and for
LOWER temperature zone is 16ºC (60ºF).
•
You can press the left side UP and DOWN keys to
control the internal temperature of the UPPER
temperature zone and press the right side
UP and
DOWN keys to control the internal temperature of the
LOWER temperature zone. When you press the two
keys at the first time, the display will show the last
temperature set previously.
•
IMPORTANT: The temperature set for the LOWER
temperature zone must always be just as high or
higher than that in the UPPER temperature zone. For
optimal performance, the set temperature of the two
zones should differ by at least 4°C.
•
The temperature that you desire to set will increase
1ºC or 1ºF if you press the
UP mark once, on the
contrary the temperature will decrease 1ºC or 1ºF if
you press the
DOWN mark once. The display flashes
while you make the setting.
•
After the temperature has been set, the display shows
the current inner temperature of the particular
temperature zone.
•
To view the set temperature at any time, press the UP
or DOWN key, the set temperature will temporarily
flash in the display for 5 seconds. Then the display
shows the current inner temperature again.
NOTE:
•
When you use the appliance for the first
time or restart the appliance after having
been shut off for a long time, there could
be a few degrees variance between the
temperature you select and the one
indicated on the LED readout. This is
normal and it is due to the length of the
activation time. Once the Wine Cellar is
running for a few hours everything will be
back to normal.
•
If the Wine Cellar is unplugged, power
lost,
or turned off, you must wait 3 to 5
minutes before restarting the Wine Cellar.
If
you attempt to restart before this time
delay, the Wine Cellar will not start.