100
Assembly - current clamps
6
Install the bottom clamp as follows:
6.1
Apply white bearing grease to the cam surface of the cam moulding
and the washer
.
6.2
, the cam moulding
and the lower clamp
assembly
in the bottom clamp moulding
7
Install the oval leg as follows:
7.1
Insert the oval leg
in the bottom clamp moulding
, taking care not to damage the surface
of the lower clamp assembly
.
7.2
and secure with screw
7.3
Refit the screw cover
.
8
Install the clamp knob as follows:
8.1
Position the clamp knob
on the bottom clamp shaft
and turn the knob counter-clockwise
to the ‘OFF’ position.
8.2
Install the grubscrew
in the bottom clamp shaft
9
Adjust the clamp
See “Adjusting ‘Pozi-Loc’ leg clamps” on page 89.
Dismantling - earlier clamps
10
Remove the clamp knob as follows:
counter-clockwise to the ‘OFF’ position.
10.2 Using a suitable instrument, such as a flat-bladed screwdriver, carefully remove the knob cap
10.3 Remove the screw
, washer
.
10.4 Remove the locking grubscrew
and adjusting grubscrew
11
Remove the oval leg as follows:
11.1 Carefully remove the screw cover
.
11.2 Remove the screw
and T-piece buffer
11.3 Pull the oval leg downwards out of the bottom clamp.
12
Remove the bottom clamp as follows:
12.1 Remove the lower clamp assembly
, the cam moulding
, the bottom clamp shaft
and
the washer
from the bottom clamp moulding
.
Содержание Vision Pozi-Loc
Страница 1: ...Contents Vinten Camera Control Solutions Next Page Previous View Vision Pozi Loc Tripods ...
Страница 8: ...8 Contents Previous Page First Page Next Page Previous View Part 1 Illustrated Parts Lists ...
Страница 85: ...85 Contents Previous Page First Page Next Page Previous View Part 2 Repairs ...
Страница 107: ...107 Contents Previous Page First Page Next Page Previous View Replacing tripod legs EFP tripods 1 2 3 4 5 2 3 4 ...