2
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Safety
Important information on the safe installation and operation of
the product . Read this information before operating the product .
For your personal safety, read these instructions . Do not operate
the product if you do not understand how to use it safely . Save
these instructions for future reference .
Warning symbols used in these instructions
Safety cautions are used in these instructions. These safety
instructions must be followed to avoid possible personal injury and
possible damage to the product.
Health and Safety
!
WARNING!
Where there is a risk of personal injury or
injury to others, comments appear supported by the
warning triangle symbol.
Where there is a risk of damage to the product,
associated equipment, process or surroundings,
comments appear supported by the word ‘
CAUTION
’.
!
WARNING! Risk of personal injury or injury to
others .
All personnel must be fully trained and
adhere to correct manual handling techniques and
Health & Safety regulations. It is the responsibility
of the local organisation to enforce safe working
practices at all times.
Mounting and Installation
!
WARNING!
The product is only intended to carry a
payload consisting of camera equipment and associated
accessories. Ensure the payload does not have protruding
sharp edges or abrasive surfaces.
!
WARNING!
Allow sufficient clearance around the products
operational footprint when mounting near walls, ceilings
and other objects.
!
WARNING!
The product and payload must be securely
mounted to a suitable base. When mounted on a wall
or ceiling, ensure the product and any payload is fully
secured using safety lanyards.
!
WARNING! Risk of electric shock
. Always check cables
for signs of damage. Damaged cables can cause personal
injury and/or damage the equipment. The product and
power supply are strictly for indoor use only.
!
WARNING!
An abnormal or unbalanced payload can
cause the product to become unstable. Strictly adhere to
payload guidelines and mounting instructions presented in
the user guide.
Do not exceed the payload limit for the product.
!
WARNING!
All personnel must be fully trained and adhere
to correct manual handling techniques and Health & Safety
regulations. It is the responsibility of the local organisation
to enforce safe working practices at all times.
!
WARNING!
Operators must familiarise themselves with
the working footprint of the robotic head, including all
associated equipment (lens, zoom and focus controls,
viewfinder, prompter, etc.) to prevent inadvertent collisions.
If personnel are too close to a head that is about to move,
the operator should prevent the motion from starting or
stop the motion if it has started.
The operator must visually verify that the active area is
clear of hazards and personnel, both before and during
remote operation.
