10
Installation
Attach the Gear Cog to the Lens Drive Motors
1 .
Align the motor retaining pegs with the location holes on the cog.
2 .
Push the cog onto the motor, ensuring it fully snaps into position.
Attach the Gear Drive(s)
1 .
Slide the motor assembly onto the rod.
2 .
Engage the gear drive with the desired control ring (zoom or
focus) on the lens.
3 .
Check that the gears mesh correctly. If the lens control ring pitch
is unsuitable, use the supplied flexi band as shown on “Attach the
Flexi Band to Camera Lens” on page 11.
2 .
To adjust the height, rotate the height adjustment knob in a
counter-clockwise direction to loosen the platform.
3 .
Adjust the Ace Base Plate platform to the required height and hold
in position.
4 .
Rotate the height adjustment knob in a clockwise direction to
secure the platform.