Vinten Osprey Plus S, Руководство пользователя

Страница: 12 / 36

10
Installation
1.
Ensure that the rubber straps on each foot support (11) are to the
outside of the ball joint.
2.
Hold the column uprigh. Raise the struts (20) to about 30° from
horizontal. The strut joints are adjusted to retain the strut in this
position.
3.
Lift the column, align the fixed strut with the fixed leg of the
skid (there is also an engraving on the skid to assit aligning the
column) and carefully lower the column base into the skid centre.
Ensure that the struts engage with the ball joints on each foot
support and the steering tube locates in its socket.
4.
Secure the struts to the supports with the rubber straps
(11).
5.
Tighten the skid clamp (14), using moderate hand pressure only.
The clamp lever has a spring-loaded ratchet-type action and is
operated as follows:
6.
Turn the clamp lever clock-wise as far as possible.
7.
Pull the lever outward against the spring pressure, return it to
vertical and release.
8.
Turn lever clockwise again.
9.
Repeat until the skid clamp is sufficiently tightened.
10.
Slide the steering indicator(s) (4) to the desired position (See
Pedestal movement
on page 20)
Column
Install the column on the skid as follows:
20
20
20
20
20
20