Vintage Car Audio KHE SERIES, Руководство пользователя

Страница: 9 / 17

RECEIVER BASIC OPERATION
1. POWER
Press the volume shaft to turn on the unit.Do not hold the knob just simply
press and release. Do the same procedure to turn off the unit.
2. AUDIO/VOLUME CONTROL
2.1 VOLUME CONTROL
The volume level can be adjusted at any time by rotating the audio level
VOL knob as select mode has been initially defaulted at volume mode.
2.2 BASS CONTROL
A. Press the tune shaft and hold for 2 seconds, release then press until L
display.
B. Rotate the Vol knob to adjust the bass effect.
2.3 TREBLE CONTROL
A. Press the tune shaft and hold 2 seconds,release then press until H
display.
B. Rotate the VOL knob to adjust the treble effect.
2.4 BALANCE CONTROL
A. Press the tune shaft and hold for 2 seconds, release then press until L
and R display..
B. Rotate the VOL knob to increase or decrease the sound level of left or
right speaker.
2.5 FADER CONTROL
A. Press the tune shaft and hold for 2 seconds, release then press until R
and F display..
B. Rotate the VOL knob to increase or decrease the sound level of front or
rear speaker.
PROGRAMMING THE PRESET MEMORY
The KHE series features 6 AM and 6 FM station memory presets and it has
a direct memory system by using only preset buttons.
1. Set the AM/FM BAND SELECTOR (
④
) in the FM position (one of FM
band) and view the FM BAND INDICATOR on the LCD DISPLAY (
②
).
2. Select the station desired by using the MANUAL UP-DOWN
TUNING CONTROL (
④
).
3. Depress one of 6 preset channel buttons and hold down until channel
flashes two times, continue same procedure to set all 6 presets.
MINI SD CARD READER
1. Insert SD card into SD card reader slot.
2. The refer to USB operation on page 10 to operate SD card.
8