Vintage Air 571065, Руководство пользователя

Страница: 6 / 24

6
www.vintageair.com
901305 REV C 9/26/2014, PG 6 OF 23
Disconnect battery.
Remove battery (retain).
Drain radiator.
Evacuate the A/C system if necessary.
Remove OEM condenser and drier (discard).
Remove OEM A/C lines from compressor to evaporator (discard).
Remove OEM heater hoses (discard).
Remove OEM A/C blower assembly (discard).
Remove OEM heater wiring (discard).
Remove A/C compressor and compressor bracket (discard).
Remove front passenger side wheel.
Engine Compartment Disassembly
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Perform the Following:
NOTE: Before starting the installation, check the function of the vehicle (horn, lights, etc.) for proper
operation, and study the instructions, illustrations, & diagrams.
Figure 1
OEM Drier
Condenser Assembly and Installation
Compressor and Brackets
Pulleys
1. Refer to separate instructions included with the condenser kit to install the condenser.
2. Binary switch installation (Refer to condenser instructions).
1. Refer to separate instructions included with the bracket kit to install the compressor bracket.
1. In most instances, the belt lengths will remain the same.
OEM
A/C Compressor
and Bracket
OEM Heater
Hoses
Blower Motor
Assembly
OEM
A/C Line
OEM
Condenser
OEM
A/C Line
Battery