18
904184 REV A 6/17/11, INST 73-80 CHEV P-UP w/ AC EVAP KIT PG 18 OF 27
GLOVE BOX MODIFICATION
USE GLOVE BOX MODIFICATION TEMPLATE PROVIDED ON PAGE 25.
PLACE THE TEMPLATE ON THE OUTSIDE OF THE GLOVE BOX ON THE PASSENGER SIDE. MARK THE OUTSIDE
OF THE GLOVE BOX ALONG THE FRONT OF THE TEMPLATE AS SHOWN IN FIGURE 17 BELOW.
PLACE THE SAME TEMPLATE ON THE INSIDE OF THE GLOVE BOX ON THE DRIVER SIDE. MARK THE
INSIDE OF THE GLOVE BOX ALONG THE FRONT OF THE TEMPLATE AS SHOWN BELOW.
CUT SIDES OF GLOVE BOX.
MARK THE BOTTOM CONNECTING EACH SIDE OF GLOVE BOX THAT WAS JUST CUT AND DISCARD THE
FRONT PORTION OF THE BOX.
INSTALL THE NEW SUPPLIED GLOVE BOX BY PRESSING THE S-CLIPS ONTO THE OEM PORTION OF THE BOX.
AS SHOWN IN FIGURE 17a BELOW.
OEM w/ AC
GLOVE BOX
DRIVER SIDE
OF GLOVE BOX
MODIFIED GLOVE
BOX
DISCARD FRONT
PORTION OF
BOX
FACTORY AIR
GLOVE BOX
TEMPLATE
FACTORY AIR
GLOVE BOX
TEMPLATE
CUT BOX WITH A
HACK SAW BLADE
ON THESE THREE
FRONT LINES ONLY
FIGURE 17
FIGURE 17a
PASSENGER SIDE
OF GLOVE BOX