14
901196 REV B 07/08/14, INST 1970-78 CAMARO wo AC EVAP KIT PG 14 OF 29
1.
Locate evaporator drain on bottom of evaporator case.
2.
In line with the drain, lightly make a mark on the firewall. Measure one inch down and drill a 5/8” hole
through the firewall (See Figure 13, below).
3.
Install drain hose to bottom of evaporator unit and route through firewall (See Figure 13, below).
1”
Drain
Drain
Hose
Drain Hose Installation
Center Louver Mounting Holes
1970-78 CAMA
RO w/o AC
CENTER LOUVER
TEMPLATE
1.
Cut out template provided on Page 27. Slide the template under the dash as shown in Figure 14, below.
Align the left and right sides of template with the crease in the dash as shown in Figures 14 & 14a, below.
Align bottom edge of the template along the bottom edge of dash as shown in Figures 14 & 14a, below.
2.
Once template is aligned correctly and taped into place, mark mounting holes on dash. Once holes are
marked in the correct location, remove template and drill (2) 3/16” holes in dash for the center louver
bezel (See Figure 14a, below).
Figure 14
1970-78 CAMA
RO w/o AC
CENTER LOUVER
TEMPLATE
OEM
Hole
Figure 14a
Figure 13
