13
901196 REV B 07/08/14, INST 1970-78 CAMARO wo AC EVAP KIT PG 13 OF 29
Kick Panel
Fresh Air
Cap
(2) #14 X 3/4”
Sheet Metal
Screws
1/4-20 X 1” Bolt
w/ Washer
Evaporator Installation
1.
Lift evaporator unit up under the dashboard (See Figure 12, below). Secure loosely to the firewall from the
engine compartment side using a 1/4-20 x 1” bolt and washer (See Figure 12, below).
2.
Using (2) #14 x 3/4” sheet metal screws, secure the front evaporator mounting bracket to the inner cowl
(See Figure 12, below).
3.
Verify that evaporator unit is level and square to the dash, and then tighten all mounting bolts.
NOTE:
Tighten the bolt on firewall first. Then tighten the front mounting bracket screws.
#10 A/C
Hose
#6 A/C
Hose
Press
Tape
Heater
Hose
Hose
Clamps
Figure 12a
Figure 12
