Vinpower Digital Daisy Chain Duplicator 3.5.4 Скачать руководство пользователя страница 59

Страница: 59 / 61

- 56 -

Emergency Power Off

If any of the following conditions occur, turn off the machine immediately and

disconnect the power cable(s) from the electrical outlet(s).

Contact an

authorized Service Representative to correct the problem:

•

The equipment emits unusual odors or makes unusual noises.

•

The power cable is damaged or frayed.

•

A wall panel circuit breaker, fuse, or other safety device has been tripped.

•

Liquid is spilled into the machine.

•

The machine is exposed to water.

•

Any part of the machine is damaged

Maintenance Information

1. Any operator product maintenance procedures will be described in the user

documentation supplied with the product.

2. Do not carry out any maintenance on this product which is not described in the

customer documentation

3. Use supplies and cleaning materials only as directed in the Operator section of

this manual.

4. Do not remove covers or guards that are fastened with screws. There are no

parts behind these covers that you can maintain or service.

Do not use aerosol cleaners. Aerosol cleaners can be explosive or
flammable when used on electromechanical equipment.

Certification

This product is certified by the following Agency using the Safety standards listed

Agency

Standard

Underwriters
Laboratories Inc.

UL60950-1

Underwriters
Laboratories Inc.

CSA C22.2 No. 60950-1-03

SPORTON
International Inc.

EN 55022:1998/A1:2000/A2:2003
Class B,
EN 61000-3-3:1995/A1:2001,
EN 55024:1998/A1:2001/A2:2003

Содержание Daisy Chain Duplicator 3.5.4






























































Результаты поиска

Содержание Daisy Chain Duplicator 3.5.4

Отзывы:

Похожие инструкции для Daisy Chain Duplicator 3.5.4

Бренды по названию

Популярные бренды

Vinpower Digital Daisy Chain Duplicator 3.5.4, Руководство пользователя

Результаты поиска

Содержание Daisy Chain Duplicator 3.5.4

Отзывы:

Похожие инструкции для Daisy Chain Duplicator 3.5.4

Бренды по названию

Популярные бренды