- 40 -
14.12 ISRC
This option will allow you to enable/disable copying the ISRC code of the Audio CD.
ISRC is the serial# of the audio tracks that uniquely identifies the song in that audio
track. This ISRC code is commonly found in commercial Audio CD’s and rarely
seen on home made Audio CDs. By enabling this feature, the duplication
performance will be lowered.
14.13 Disable
Drives
This feature allows you to disable certain drives/trays when those drives/trays are
producing high failure rates or not functioning properly.
14.14 CD
Overburn
Overburning is the process of recording data past the normal size limit. Many disc
manufacturers extend a recordable disc to leave a small margin of extra groove at
the outer edge. This feature allows you to turn the ability to use the overburn area
ON or OFF.
14.15 USB Connection / Firewire Connection (Optional)
This feature will allow you to turn on/off the USB / Firewire port on the back of your
system. This option will allow one or more Writers on the system to be controlled
by a PC. This feature will only be visible if supported USB/Firewire Connections
were installed.
*Please note that system needs to be restarted when this setting is changed.
15. Utility
15.1 Disc
Info
If you are uncertain about the type of blank recordable media you are using, the
system is equipped with the disc info function to help identify and notify you of the
disc information encoded within.
This feature will identify your blank recordable media’s format, capacity, manufacture
ID as well as the media’s certified writing speed. Please note that limited information
will be displayed for media in the Reader drive.
15.2 Prescan
Approximately 50% of failures reported by our system are caused by errors in the
master disc which our Reader couldn’t overcome. When this kind of failure occurs, it
tends to waste all of your blank recordable media.
To help detect flaws in the master disc prior to performing the duplication process,
we introduce the “Prescan” feature. This feature will scan and detect any bad
sectors existing in the master disc. It is recommended to perform this feature before
starting the duplication task for all master discs. By doing so you can prevent
wasting blank media due to an error in the master disc.
15.3 System
Info
By entering this menu, you will be able to see the hardware and software information
pertaining to your system.
