-15-
Care Guide
1. Cleaning Condenser
•
Clean the condenser regularly at least every 6 months.
•
Condenser is located on the ambient air intake side of the cooling unit.
•
Use a condenser brush or a vacuum cleaner with an extended attachment to
clean the condenser.
2. Removing Condensate
Remove the excessive condensate if it is accumulated on the cooling unit in high
humidity conditions.
3. Removing Unit
When you remove the cooling unit, beware water may come out of the unit.
4. Installing Drain Line
The units are equipped with an additional drain fitting. In case of extreme humidity
there is a drain line needed, remove the drain plug on the bottom left at the rear,
then remove the connection plug and fit a 0.375” OD drain tube into the drain
connection. Install the cooling unit with the front higher than the rear.
