Vinotemp WINE-MATE WM1500 HTD, Инструкция по использованию и уходу

Страница: 7 / 23

- 6 -
•
If top exhaust, cut another rectangular opening at the top of the cabinet to
the length and width of the top exhaust (see Fig.2.2 & 2.3).
•
Make 2 holes at the ceiling and install the ¼” inside diameter wood thread
inserts (see Fig.2.1 & 2.3).
•
Place the gaskets (1/2” foam tape) on the gasket lips (see Fig 2.4).
•
If top exhaust, place another gaskets along the top exhaust at the top of
the cooling unit (see Fig.2.9).
•
Move the cooling unit towards the mounting sides and push to press the
gaskets.
•
Fasten the 2 brackets and use 7/16” wrench to tighten the two ¼” screws
(see Fig 2.5, 2.6 & 2.7).
•
If top exhaust, install another top exhaust grille at the top of the cabinet
(see Fig 2.8).
•
Plug the cooling unit in receptacle.
•
Plug the wine cabinet.
Fig. 2.1 MOUNTING CUTOUT AND SCREW INSERT