![Vinotemp cavanova Romanzo IL-OW006 - 2Z Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/vinotemp/cavanova-romanzo-il-ow006-2z/cavanova-romanzo-il-ow006-2z_owners-manual_1028277006.webp)
6
2.
Set the desired cooling temperature by pressing the corresponding buttons
for “set
lower” program. Pressing the button once will decrease the temperature by 1 degree.
The temperature selected will flash in the LED display for approximately 5 seconds an
d
then revert back to display the temperature of the internal cooler. The left
zone can be
adjusted from 5
℃
/ 41°F to 10
℃
/ 50°F. The right zone’s temperature setting can be
adjusted from 10
℃
/ 50°F to 18
℃
/ 64°F.
When using your cooler we recommend you
maintain 7 degrees difference between the left temperature zone and the right.
3.
To view the “set” temperature, press
once. The “set” temperature will temporarily
flash in the LED display for 5 seconds.
RUN
This
indicator light will illuminate when the cooling mode is currently in operation.
Light
You can turn the interior light ON or OFF by pushing the button marked with the “bulb” symbol.
For best storage of wine, keep the light off except when viewing.
LOCK
Press the “LOCK” button for 3 seconds to lock the control panel. To unlock the control panel,
press the “LOCK” button again.
To switch between Celsius and Fahrenheit readings, press the “LOCK” and “LIGHT” buttons
simultaneously for 3 seconds.
NOTE:
-‐If the unit is unplugged, turned off or if there is a power failure, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the wine cooler will
not start working.
-‐When you use the wine cooler for the first time, or restart the wine cooler after having been
shut off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LED readout. This is normal and is due to the length of the
inactivation time. Once the wine cooler is running for a few hours everything will return to
normal.
-‐The top of the cooler has 6 bottle holes. The two on the left side are the low temperature zone.
The four on the right side are the high temperature zone. Temperature may fluctuate depending
on the ambient temperature and the seal of the wine cooler.